We offers the variety and highest quality standard Collet Chucks
We offers a wide range in hydraulic chucks on BT/DV/CAT & HSK tapers
Turn-mill center & AT3 Taper check on air electronic gauge
CNC Internal Grinding

HSK 63A Shank Tools - DIN 69893 part 1, form A

ER Collet Chucksk

Balanced by Design, Through the tool holder coolant capability
Order Example – HSK63AER25100M
Dynamically balanced to G6.3 @ 15,000 rpm & G2.5 at 20,000 rpm, available on request
Order Example – HSK63AER25100M-G2.5M

ER Collet Chucks

TG Collet Chucks

• Through the tool holder coolant capability.
• Dynamically balanced to G6.3 @ 15,000 rpm & G2.5 at 20,000 rpm available on request
• Order Example – HSK63ATG075115M-G2.5

TG Collet Chucks

End Mill Adapters

• Balanced by Design, Through the tool holder coolant capability
• Order Example – HSK63AEM06065M
• Dynamically balanced to G6.3 @ 15,000 rpm & G2.5 at 20,000 rpm available on request
• Order Example –HSK63AEM06065M-G2.5

End Mill Adapters HSK –Metric

End Mill Adapters HSK – Inch.

Whistle Notch Adapters – Metric

• Balanced by design, Through the tool holder coolant capability
• Order Example – HSK63AWN06080M
• Dynamically balanced to G6.3 @ 15,000 rpm & G2.5 at 20,000 rpm available on request
• Order Example –HSK63AWN06080M-G2.5

WN-HSK Form A - Metric

Whistle Notch Adapters – Metric – Short

SWN-HSK Form A

Drill Chucks

• Recommended for light drilling
• Through the tool holder coolant capability / along cutting tool shank.
• Order Example – HSK63ADC13117M

DC-HSK Form-A

Morse Taper Adapters

• Balance by-design, No through coolant capability
• Recommended for tools with a morse taper and tang
• Order Example – HSK63AMT1100M

MT – HSK Form-A

Hydraulic Chucks.

• Pre Balanced to G6.3 @ 15000 rpm, Through-the tool holder coolant capability,
• Order Example – HSK63A-SHYD06-080M
• Dynamically balanced to G2.5 @ 20,000 rpm available on request
• Order Example – HSK63A-SHYD06-080M G2.5

Hydraulic Chucks – Metric

Hydraulic Chucks – Inch

Shrink Fit Adapters – Metric

• Pre Balanced G6.3 @ 15,000 rpm, Through tool holder coolant capability, Suitable for carbide & HSS Cutting tool, Runout < 0,003mm ( 0,0001"),10mm ( 3/8") axial adjustment.
• Order Example – HSK63ASF06080M
• Dynamically balanced to G2.5 @ 20,000 RPM available on request
• Order Example – HSK63ASF06080M G2.5

BSF-HSK Form A – Metric

Shrink Fit Adapters – Inch

• Pre Balanced G6.3 @ 15,000 rpm, Through tool holder coolant capability, Suitable for carbide & HSS Cutting tool, Run out < 0,003mm (0,0001"), 10mm (3/8") axial adjustment.
• Order Example – HSK63ASF025315
• Dynamically balanced to G2.5 @ 20,000 RPM available on request
• Order Example – HSK63ASF025315 G2.5

BSF-HSK Form A - Inch

Shell Mill Adapters

• Balanced by Design, Through the tool holder coolant capability
• Order Example – HSK63ASM16050M

Shell Mill Adapters – Metric

Shell Mill Adapters – Inch

Slitting Cutter Adapters – Inch

• Balanced by Design
• Order Example – HSK63ASA062400

Combi Shell Mill Adapters

• Through the tool holder coolant capability,
• For milling cutters with transverse or longitudinal slot
• Order Example – HSK63ACS16060M0

Combi Shell Mill Adapters – Metric

Boring Bar Blank

• Machinable front end 28-34 HRC
• Order Example – HSK63ABB080250M