We offers the variety and highest quality standard Collet Chucks
We offers a wide range in hydraulic chucks on BT/DV/CAT & HSK tapers
Turn-mill center & AT3 Taper check on air electronic gauge
CNC Internal Grinding

CV40 Shank Tools - Caterpillar (inch) CV ANSI B5.50 / ISO 7388

ER Collet Chucks

• Balanced by Design, Through tool holder coolant capability Flange through coolant Form B/AD available on request
• Order Example – CV40ER16250 Order Example – CV40BER16250
• Dynamically balanced to G6.3 @ 15,000 rpm, & G2.5 at 20,000 rpm. available on request
• Order Example – CV40ER160250-G2.5

ER Collet Chucks – Form AD

ER Short – CV Form AD

TG Collet Chucks

• Balanced by Design, Through tool holder coolant capability Flange through coolant Form B/AD available on request
• Order Example – CV40TG075254G Order Example – CV40BTG075254G
• Dynamically balanced to& G6.3 @ 15,000 rpm & G2.5 at 20,000 rpm. available on request
• Order Example – CV40TG075254G-G2.5

TG Collet Chucks

DA Collet Chucks

Balanced by Design, Through tool holder coolant capability
Order Example – CV40DA208300,
Dynamically balanced to G6.3 @ 15,000 rpm, & G2.5 at 20,000 rpm. available on request
Order Example – CV40DA208300-G2.5
Flange through coolant Form B/AD available on request Order Example – CV40BDA208300

End Mill Adapters – Inch

• Balanced by Design, Through tool holder coolant capability Flange through coolant Form B/AD available on request
• Order Example – CV40ZEM012138 Order Example – CV40BEM050262
• Dynamically balanced to G6.3 @ 15,000 rpm, G2.5 at 20,000 rpm. available on request
• Order Example – CV40ZEM012138-G2.5

End Mill Adapters – Metric

Whistle Notch Adapters

• Balance by design,Through the tool holder coolant capability
• Order Example – CV40BWN06M244
• Dynamically balanced to G6.3 @ 15,000 rpm, & G2.5 at 20,000 rpm. available on request
• Order Example – CV40BWN06M244G2.5

Whistle Notch Adapters – Metric

Drill Chucks

• Balance by-design, No through coolant capability.
• Order Example – CV40DC13M421

MT – CV Form-A

Morse Taper Adapters

• Balance by-design, No through coolant capability
• Recommended for tools with a morse taper and tang
• Order Example – CV40MT1175

Hydraulic Chucks

• Pre Balanced G6.3 @ 15,000 rpm, Flange through coolant Form B/AD available on request
• Through tool holder coolant capability Order Example – CV40B-SHYD06-075M
• Order Example – CV40-SHYD06-075M
• Dynamically balanced to G2.5 at 20,000 rpm. available on request
• Order Example – CV40-SHYD06-075MG2.5

Hydraulic Chucks –Metric Form B/AD

Hydraulic Chucks – Inch Form B/AD

Shrink Fit Adapters

• Pre Balanced G6.3 @ 15,000 rpm, Flange through coolant Form B/AD available
• Through tool holder coolant capability Order Example – CV40BSF06M800
• Suitable for carbide & HSS Cutting tool,
• Runout < 0,003mm ( 0,0001"),
• 10mm ( 3/8") axial adjustment.
• Order Example – CV40BSF06M350
• Dynamically balanced to G2.5 at 20,000 rpm available on request
• Order Example – CV40BSF06M350-G2.55

Shrink Fit Adapters – Inch

Shell Mill Adapters

• Balanced by Design, Through the tool holder coolant capability
• Order Example – CV40SM050138

Shell Mill Adapters – Inch

Jacobs Taper Adapters

• Balance by-design, No through-coolant capability.
• Recommended for tools with a Jacobs internal taper.
• Order Example – CV40JT2244

Boring Bar Blank

• Balance By Design, Machinable front end 20-30 HRC, 5/8"- 11 UNC Draw Bar Thread.
• Order Example – CV40BB400120

JT-DV Form-A