Our Products

Carbide Tipped Masonry Drills

Specially developed Carbide Tipped Masonry Drill for drilling of all traditional buildings material such as Concrete, Stonework, Bricks, Tiles, Slates, Marble, Granite etc. ITM Carbide tipped Masonry Drills are manufactured from alloy steel, have ground flutes, bright finish and combined with ITM's unique brazing and heat treatment process results in withstanding shocks and outstanding resistance to wear during its use.

The brazed Tungsten Carbide Tip is manufactured according to international specifications with optimum cutting geometry that ensures fast, efficient and correctly sized drill holes with optimum drilling economy. ITM Carbide Tipped Masonry Drills are available from Dia. 3 mm to 13 mm in Metric sizes and from 1/8" to 1/2" in inch sizes.

MASONRY DRILLS - CARBIDE TIPPED(GROUND FLUTED BRIGHT PLATED)

Sr. No Diameter Flute Length Overall Length
  mm inch    
1 3.0 1/8 40 76
2 4.0 5/32 45 85
3 5.0 3/16 45 90
4 5.5 7/32 45 90
5 6.0 15/64 60 110
6 6.5 1/4 60 110
7 7.0 9/32 60 110
8 8.0 5/16 80 120
9 9.0 11/32 80 120
10 10.0 3/8 80 120
11 11.0 7/16 115 160
12 12.0 15/32 115 160
13 13.0 1/2 115 160